Car Alarms: car alarm problem, crime stopper alarm, alarmtek

Question
Hi I have a crime stopper alarm on my car sometimes the remote works and sometimes it doesn't, today it alarmed itself and I can't get it to stop,I thought the battery needed changing did that and still nothing what can I do?

Answer
Ok, let's try to put it into valet/service mode.

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.

This solves the problem for now.

Then if you want to remove it, take it to a local
after market car alarm dealer and have it done there.

They may even be able to reset/reprog. the features on
the alarm you have, to allow you to use the system
more comfortably, but of course, your call.

Have a nice afternoon.

Robert Martin
ALARMTEK.