Car Alarms: remote start, remote start, necessary connection

Question
ok i first hit my remote start button and the car started up..  then i got in the truck and accidentally pressed the brake and the truck turned off, now the truck will not start even with the key. All electric turns on and the fuel pump runs but it will not turn over....any ideas?

Answer
Yes, you set off the alarm part of the system.
Try using your valet switch, and you user manual,
and toggle between armed and unarmed mode.
That basically resets the alarm and will allow for
remote start again.

The brake is a default/necessary connection when doing
this work, so someone can't jump in without the key,
and drive off.

ALARMTEK
REMOTESTARTCENTRAL.COM