Car Alarms: Resetting Car Alarm for Infinit 1995 J30, security light, battery cable

Question
I recently was awaken by my car alarm going off. I could not reset it with the remote and had to remove the battery cable and then the fuse for the horn.  Now after reconnecting the battery, the alarm will still not reset, the headlights are on, the flashers are steadily on, the security light is on on the dashboard, and I can't lock the driver side door with the key while the battery is connected.  This is a factory alarm system.  Thanks for any help you can give.

Answer
Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
orange |-|at the theft warn module.
The theft warning module located under
drivers side dash.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com