Car Alarms: 94 Chrysler Eagle Vision Car Alarm, key cylinder, orange wire

Question
The car alarm for a 1994 Chrysler Eagle Vision is stuck and the car can not be started with it on. We do not have the key less entry remote. We have tried resetting the alarm by unlocking the passenger side door (which has worked in the past), but it will not work this time. After a little while, the alarm goes off, but as soon as a door is opened, it is triggered again. How do we totally disarm the system? Thank you very much for your time.

Answer
If unlocking either of the front two doors with the key is not working there must be a problem with the switches attached to the key cylinder's in each door.  When you unlock either front door the switch sends a ground through a light green/orange wire to the alarm brain and disarms the alarm.  If both of these are not working, sending a ground to the light green/orange in either kick panel should disarm the alarm for you.