Car Alarms: Chrysler Concorde 1994 Lost Fob disarm Alarm system, chrysler concorde, 1994 chrysler concorde

Question
Hi my college student young adults have a 1994 Chrysler Concorde... They lost the key fob and the disarming with the key in the locks do not work... they need the car and are not concerned about the alarm system.... We would like to permently disable the system ... but we are unable to find out how... we have tried resetting it with pulling fuses and then replacing them but ..this has not worked either... please if there is a way to permently disable the alarm system ... could you please tell us... they need this car so they can work... we are not worried about it being stolen ... it is an old car ... thank you  

Answer
Ok, they can get someone to help, or
try this themselves...

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM is the
lt.green/orange 20 gauge
|-| negative wire in either kick panel,
at the door harness.
That's the area behind the plastic coverings
at your left leg area, or at the same spot
on the passenger side.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel. It's up to them to protect it from here
on in.

Luck with it.

ALARMTEK
CARALARMSTORE.com