Car Alarms: ignition control door lock autopage, autopage alarm, brain box

Question
Hello,
I purchased a vehicle with an Autopage alarm previously installed, and I am quite pleased with it. However this past week, the ignition control door lock feature has been giving me a headache. I possibly activated it by accident, or the alarm has a malfunction- I don't know. the only documentation I was able to find on their website reads

"IGNITION CONTROL DOOR LOCKS. (See Feature II – 3 Programming.).
If the vehicle’s door locks have been interfaced to the security system, the system will
automatically lock the vehicle's doors when the ignition is turned “ON” and /or unlock the
vehicle’s doors when the ignition is turned “OFF”.

there is no other "Feature II – 3 Programming " on their site......

I want to disable this feature, and I am not sure which model alarm I have. The control module is buried very well in the dashboard. The key fob, however, is an XT-59

Any help you can provide me is greatly appreciated.

Answer
You will need to locate the
brain box to change the settings I believe.
Not certain though, which setting or how,
but the other techs in my forum may be able
to assist you with Autopage feature settings.

Please take this question to the  
techs at my online 12 volt installation
forum at:

www.installsupport.com

Good luck with it.

ALARMTEK
CARALARMSTORE.com