Car Alarms: remote start, bulldog remote start, lt blue

Question
i purchased a bulldog remote start and the wire diagram for the 92 ford explorer, shows the ignition 1 and 2 as red w/green stripe and black w/green stripe but niether color is on my ignition harness, so it turns over but doesnt start, ive probed them all and cant find either wire hot when in run and crank position. thanks Bob

Answer
Ok, here they are again,
make sure you are on the harness coming
from the ignition key switch:

12V|yellow |+|ignition harness
STARTER|red/lt. blue |+|ignition harness
IGNITION|red/lt. green |+|ignition harness
ACCESSORY|gray/yellow |+|ignition harness

These are there. Please check the
harness again.

A.