Car Alarms: remote start 555u imobilizer, alarmtek, remote start

Question
Iam installing a OMEGA COMFORT START remote start with keyless entry.Iam also useing a 555U universal imobilizer.My question is which output wire do i use from the omega to the imobilizer and should it be a stedy  - output.

Answer
Not certain of the color on the Omega, or
the DEI piece since I don't sell or install
either one, but in the manual, it should
read as the "ground output when running" wire.
This goues to the ground input wire on the
bypass module.

That will allow the bypass module to trick the
ignition into thinking the key is in place.

I hope this works out for you.
I might suggest writing to OMEGA for some support
if need be on they're equipment.

Good luck with that.

ALARMTEK