Car Alarms: Question About Viper Alarm, viper 300, shock sensor

Question
Hi, I am a novice to car alarms, but I do have the need to increase the sensitivity on my alarm. I have a Viper 300 ESP and it would be very helpful if you could tell me what I would have to do to adjust it. I have a 96 Acura Integra, and the car was bought used with the alarm installed. Thanks a lot, Daniel

Answer
Drop the panel uner the steering column,
and locate the shock sensor. and turn the wheels
on them clockwise to increase sensitivity,
counter clockwise to decrease, until satisfied
with the level. You will have to set and check
it each time to find the levey you are
comfortable with, the replace the panel.

Good luck with it.

ALARMTEK
CARALARMCITY.com