Car Alarms: CAR ALARM TROUBLESHOOTING, dash area, flip switch

Question
I HAVE A DODGE STRATUS 95 I NEED TO KNOW HOW TO DISACTIVATE MY CAR ALARM, MY CAR ENGINE START , BUT THERES NOT SPARK  FROM THE DISTRIBUITOR TO THE MOTOR  THE MOTOR IS BLOCKED, THIS HAPPEN ONE TIME AGO, 6 MONTHS AGO, IN THAT TIME THE ELECTRIC MAN TOLDME THAT THE CAR ALARM WAS BLOCKING THE POWER BECAUSE  MY CAR HAS ANTITEFT......AND HE DESACTIVATED BUT, I NEED TO KNOW HOW TO DO IT MYSELF...
I APRECIATE THE HELP THAT YOU CAN GUIVE ME  THANKS

Answer
Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
CARALARMSALES.com