Car Alarms: got a disabled viper alarm, valet mode, viper dealer

Question
I have a 1990 Honda Accord LX with with a Viper Alarm. Yesterday have the alarm in valet mode (pressed the lock+unlock+lock keys in this sequence) and LED light went solid. I disconnected the car battery because I was working on my sterero. Connected the battery and the alarm will not work and the LED light remains solid. I will appreciate any help. Thanks

Answer
Try the valet button under the dash that was installed.
Look in your manual to go into overide/valet.

Then contact a Viper dealer to see why it's
not responding as expected. I do not do DEI alarms.
Just don't care for them, but you
may need a dealer here if you can't get into and
out of valet mode. Check it out, and
if no luck, go to my forum at www.installsupport.com
and ask this question there. Someone there
will be able to help.  

Good luck.

ALARMTEK