Car Alarms: 95 Beretta harness for Scytek Galaxy 5000 rsw 2way, chevrolet beretta, alarmtek

Question
Subject: '95 Beretta harness for Scytek Galaxy 5000 rsw 2way
Question -
Subject: Alarm for '95 Chevrolet Beretta V-6
Question -
Hi
I am looking for a alarm with pager w/ any kits that may have to be used.Do not need a remote starter,but I am willing to accept if need be.Both alarm and pager must be loud and hard to disable.I do not want to "lose" another stereo.Would like it to be reasonably priced but am willing to go the extra dollar to be "protected".This car has never had an alarm installed.I have a friend who will assist me with the install,he has some backround in this kind of thing.I do like the fact that if I buy from you I do get direction(s).


ALARMTEK Answers -
I have several to fit the bill. If you want car alarm, keyless entry, and starter disable only, the Galaxy
1000 2way, (ASTRA 777) is a great system 2000 foot
range and comes with 1 pager remote, 1 standard 5 button
remote. This along with a starter kill would run
107.95 plus 9.99 s&h.

If you wanted remote starter which is not difficult in this
vehicle at all, get the Scytek Galaxy 5000 rsw 2way or the Ultrastart 4255tl (at 169.95 +s&h) for either system),
for the best range and ease of installation.

These would be the suggested systems
from my store (www.CARALARMZ.com)
for your requirements.

Should we narrow it down together?
Write me back and we can answer your questions
and send you the perfect system tailored to you
and your requirements.

Hello
I am wondering if this alarm/starter comes with OR can be fitted with a harness specifically suited for this vehicle?I do not want to splice any wires installing it.

Thanks,Mark


ALARMTEK Answers -
No Mark,
No such thing as a plug n play unit. You are going
to have to install it correctly.
Sorry about that but if it were that easy..........

I guess my question should have been,Is this system compatible with the factory main harness?
Thanks again,Mark


Answer
Well for our purposes you will be interfacing
select wiring I will provide, so you can do this yourself,
or, take to a tech if unsure of what you are doing.

This car has very few installation issues.
It would take me 2.5 hours to do it
complete, maybe 4 to 5 for a novice.

Let me know and we'll send you an invoice to your
email for everything (relays needed and shipping).

ALARMTEK
installsupport@aol.com