Car Alarms: car alarm, dash area, car alarm

Question
my car alarm was not working properly so I disarmed it. I put a new battery in and now i cant't turn my car on cause the cut-off switch won't let me. what should i do? thanks for any help you can give me.

Answer
Ok, don't panic. Try this.

Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the button until
the installed LED (the blinking light)
in your dash area comes on solid.

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK