GMC Repair: 2000 blazer timing marks and TDC, e mail address, electrical schematics

Question
I have a 2000 Blazer 4.3L that was leaking water.  The previous owner said he had it pressure checked and the intake gasket was leaking.  I removed the intake and replaced the gaskets.  In doing so, I removed the distributor without marking it.  I have reinserted distriburtors before without problem, but I  cannot get this truck started.  There are three marks on the balancer a line, then a dot, then a line, all about two inches apart.  I need to know which mark to line up, or how to get the distributor inserted correctly again.

Thanks

Larry

Answer
I have pictures and written procedures for installing the distributor correctly on a 2004 4.3L engine that I can provide you with.

However, You will need to contact me at:


onlineautohelp@msn.com


In order for me to send you some electrical schematics and pictures related to your problem, as this website is NOT mine and I am only a VOLUNTEER helping answer BASIC simple questions to those in need as this website does not allow pictures to be sent..

Please include all of the previous information, MAKE, YEAR, MODEL, Engine size, transmission type and all necessary other information pertaining to your problem as well as what you  already said here about your vehicle to my above said e-mail address.


autohelp