Audio Systems: 06 town and country video out, chrysler town and country, signal amplifier

Question
we have a 2006 Chrysler town and country with nav and a 6 disk dvd changer in the dash but, there weren't any factory screens.  so the dealership we bought it from had headrest dvd players installed and all tho they work they do not work with the factory dvd player like i asked for.  i have searched the web and have found there is an audio out plug and a video out plug on the back of the factory dvd changer.  i have also heard that i can make a video out with the factory plug to RCA.  but in order to do this i need a schematic of the dvd changer plugs.  have you done or seen this done?  and what about the quality?  thanks so much for your time.

Answer
The audio and the video is perfect clear you need to run one video rca wire to the monitor if you have 2 or more screen  get a video signal amplifier, the instructions are on the back of the dvd player just pull it out of the dash and you will see all the pins you need to solder 2 wires
good luck