QuestionI am installing a radio in a 96 Jeep,I have the manuals on the wiring connection, after I hooked the radio up... nothing. My initial reaction was to go check the fuse. When I looked under the dash I was in awe. The previous owner must have done something to the wiring, because there are many sets of wires hanging all over,toggle switches everywhere and I do not have the manual for the Jeep, I wouldn't even know where the fuse for the radio would be. I've installed a few radios in my time but I'm dumbfounded on this one, could you help?
Answerwe can simply run new wires, you only need 3 for power,
1. the ground just attaches to the body
2. the yellow (usually yellow) goes right to the posative on the battery
3. the red is a switched posative that is only on with the key and usually you can splice the cig lighter for this.
Get a meter if you dont have one, it will help tremendously in finding what you need.
If you need more detail than this please feel free to ask.
