Audio Systems: Clarion model# PS_9063V, model ps, battery terminal

Question
     Car stereo works fine except it is stuck
on 1 channel only.Will not tune to another

Answer
Hello Shawn,
Try looking for a small reset button that you press with a tip of a pin. You can also try disconnecting one battery terminal for about 5 minutes and then reconnect it to see if this resets the processor in the stereo. If this doesn't correct the problem, most likely several things may be the cause of your stereo problem. 1-the tune up and down switch/s may be defective 2-the processor is defective. 3-one of the contact switches is shorted out causing the tune to be locked up. Does any or all of the other switches operate?

TOM,
T&D ELECTRONICS
tdeser@zoominternet.net