QuestionQUESTION: car stalled it was wet inside had heater core replaced drove car home car stalled, replaced fuel pump, thermostat, module on top of distributor car still stalls, got a diagnostic that said the cam position sensor was the problem, car still stalls.
ANSWER: If the cam sensor is the problem, Replace it.
---------- FOLLOW-UP ----------
QUESTION: i did replace it and it still stalls, i tried to get the error codes by turning car on, then off and pushing the off and the heat buttons at the same time, nothing came up on the screen
Answer!. Ignition key ON, Engine OFF.
2. Simultaneously push and hold the OFF and WARMER buttons on the climate control panel for 3 seconds and release them.
3. Fault codes will appear in the form of LETTER/NUMBER combinations and the word CURRENT or HISTORY will appear with each code that displays.
4. The system will stop at PCM?
5. I need to know what codes appear and if they are CURRENT or HISTORY.
WHY did you replace the CAM sensor ?.
