QuestionTom,
I am still a bit new to automotive repair. Please tell me what the I032 code means?
-------------------------
Followup To
Question -
Thank you for answering the questions so thus far. I followed the instructions and these are the codes that appear in sequential order: P043 (history, P137 (history), I032 (current), NO ACP codes, NO SIR codes, NO TCS Data, NO RSS codes, and PCM?
I will wait for the response.
-------------------------
Followup To
Question -
Okay. How do I erase the codes?
-------------------------
Followup To
Question -
1995 Cadillac Eldorado; V8 Engine
What do the following codes mean: P030 History, P038 History, P043 Current, P046 History, P052 History, P074 History, P109 History, P137 History, I027 History, I032 History, I052 History, NO ACP Codes, NO SIR Codes, T072 History, T073 Current, T027 Current, NO RSS Codes and PCM?
Also, what causes the vehicle to vibrate when idle, increase speed hesitancy when pressing the accelerator, and increasing speed when the accelerator is not being pressed?
Why is it that the car never starts on the first crank attempt and always on the second attempt?
Also, the service engine soon light comes on frequently.
Whereas my driving distance has not changed, the miles per gallon has. Before the idle/vibrating problems began, I was able to do my weekly routine on a full tank of gas, now I fill up 2 times per week.
Most recent repairs done were harness replacement, fuel filter, and spark plugs.
Answer -
Erase all the codes and then see which ones come back.
Answer -
1. Ignition ON, Engine OFF.
2. Simultaneously push and hold for 3 seconds the OFF and WARMER buttons on the climate control panel and then release thee buttons.
3. All your codes will display and will stop at PCM?
4. push and release the HI button.
5. wait until you see PCM DATA?
6. Continously push and relaese the LO button until you see PCM CLEAR CODES?
7. Push and release the HI button and you will see PCM CODES CLEAR and just wait for 3 seconds. This will clear the "P" codes.
8. push and release the AUTO button.
To clear the "I" codes.
1. Simultaneously push and hold for 3 seconds the OFF and WARMER buttons on the climate control panel and then release thee buttons.
2. All your codes will display and will stop at PCM?
3. Push and release the LO button and IPC? will appear.
4. push and release the HI button.
5. wait until you see IPC DATA?
6. Continously push and relaese the LO button until you see IPC CLEAR CODES?
7. Push and release the HI button and you will see IPC CODES CLEAR and just wait for 3 seconds. This will clear the "I" codes.
8. push and release the AUTO button.
9. Turn OFF the ignition.
10. Go drive the car for awhile and see if any codes reappear and let me know what they are.
Answer -
You need to fix the I032 FIRST.
AnswerLoss of AUTOMATIC BRAKING SYSTEM and LOSS OF TRACTION CONTROL SYSTEM.
You will need to contact me at:
onlineautohelp@msn.com
In order for me to provide you with pictures and and electrical schematic to find and fix your problem since this board does not allow sending pictures.
PLEASE include your original question(s) and the MAKE-MODEL-YEAR and ENGINE SIZE of your vehicle when you contact me.
autohelp
