QuestionHow do i clear the codes? The service engine light went off (by the way) after i drove the car on the freeway for a little bit, but it would still be nice to know how to clear computer thank you
-------------------------
Followup To
Question -
Hello!
The light “service engine soon” was coming on and off for awhile until it finally stayed on. Error code P085. When I opened to clean throttle body it actually had 2 blades that covered sort of shafts going down. I cleaned the walls of the shafts and the blades. But underneath the blades if you look down the shafts there is sort of a pane and I couldn’t clean that. Also directly under each of the blades there is a thin tube-like structures, what do they do, do they have to be cleaned as well? I felt like the engine started to run much better after the cleaning, but the “service engine soon ”light is still on, And the P085 is still current. I tried to look on the website but couldn’t find anything. Also on the pictures(from internet ) that I used to fix my car there was something called MAF screen that had to be removed to access the throttle body, but mine didn’t have MAF way is that?
Thank you so much
Answer -
Try CLEARING the codes and then see if the same code comes back.Try CLEARING the codes and then see if the same code comes back.
Answer1. Ignition ON, Engine OFF.
>
> 2. Simultaneously push and hold the OFF and WARMER
> buttons for 3 seconds and release.
>
> 3. Write down all the LETTER/NUMBER (codes)
> combinations that appear until you see PCM? displayed
> and let me know what the codes are..
5. Push and release the HI button and you will see PCM DATA?
6. Push and release the LO button and you will see PCM INPUTS?
7. Push and release the LO button and you will see PCM OUTPUTS?
8. Push and release the LO button and you will see PCM OVERIDE?
9. Push and release the LO button and you will see PCM CLEAR CODES
10.Push and release the HI button and the codes will clear in 3 seconds.
11. Turn ignition OFF.
