Chevrolet Repair: door handle bezel 1995 tahoe, flat blade, power locks

Question
Hi John,
Looking for instructions on removing the door handle bezel on a 1995 Tahoe.  it's the drivers side door and I'm pulling the panel to access the inside handle linkage as this won't open from the inside anymore. once I get the bezel off, I can get the remainder of the panel off, just struggling a bit on the bezel.  any help would be most appreciated.   thanks  

Answer

inside handle Remove or Disconnect



Handle bezel from door trim panel.
Insert a flat blade tool between the door inside bezel and the handle assembly.
Carefully bend retaining clips outward while pulling out the bezel.
Disconnect the wiring connector (if equipped with power locks).
Install or Connect



Handle bezel to door trim panel.
Connect the wiring connector (if equipped with power locks).
Snap bezel into place.