QuestionI know this has nothing to do with the engine but, my cd player quit working. I was riding down the road and suddenly it made this awful noise and shut off. There is still a cd in the player. It will not eject. My light on the cd player is not on and none of the buttons that operated the cd player works, however my radio works fine.
Now I don't know whether this a part of the reason for this, but a few months ago, I had to have a new ignition lock put on. It keep cutting off and not starting. I would have to wait 10 to 15 min for my car to start. Since the dearlership has put it in, my car honks for no reason. It will honk when I crank up and cut the car off. My doors will not unlock now when I cut the car off, where they us to automatically unlock. The locks on my passanger door will not unlock or lock the car anymore. It all has to be done for the drivers side. I tried to take it back to them, but when I explain to him what was happening he said they did not do it. Now I will have to pay for what started happening to my car less than a week after they worked on it. Could you please help me with my cd player problems.
1. How do I get the cd out?
2. Is it a fuse blown or something loose that can be reconnected or replaced? OR have my cd player just gone bad?
3. Do you have any suggestion as to why my car honks now?
4. Or what maybe wrong with my locks?
Thanking you in advance,
Alania
AnswerHi Alania, Here is the page on setting your locks to how you would like them to work.....
Vehicle Personalization
Modes of Operation
Automatic Door Locks (Manual Trans)
The following are the modes of operation for the automatic door locks feature:
Mode 1: All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph). All of the doors will unlock when the transaxle is shifted into REVERSE (R) and the key is turned to OFF. Mode 2: if equipped with RKE All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph). Only the driver door unlocks when the transaxle is shifted into REVERSE (R) the key is turned to OFF.
Mode 3: All of the doors lock when the vehicle speed exceeds 8 km/h (5 mph). No automatic door unlock.
Mode 4: No automatic door lock or unlock.
Automatic Door Locks (Automatic Trans)
The following are the modes of operation for the automatic door locks feature:
Mode 1: All of the doors lock when the vehicle is shifted out of PARK. All of the doors unlock when the vehicle is shifted into PARK and the key is turned to OFF.
Mode 2: All of the doors lock when the vehicle is shifted out of PARK. Only the driver door unlocks when the vehicle is shifted into PARK and the key is turned to OFF.
Mode 3: All of the doors lock when the vehicle is shifted out of PARK. No automatic door unlock.
Mode 4: The automatic door lock feature is disabled.
Programming Features
Enter Programming
To enter the programming mode, perform the following actions:
On a vehicle with a manual trans, place the trans in REVERSE. Apply the park brake.
Close all of the doors.
Turn the ignition to the RUN position.
Automatic Door Locks
Continue with the following steps in order to personalize the automatic door locks:
Press hold the LOCK button on the power door lock switch for 10 seconds. The vehicle will chime with the number of chimes corresponding to the current mode. Refer to Automatic Door Locks modes.
Press and hold the LOCK button on the power door lock switch for 10 seconds again in order to advance to the next mode. The vehicle will chime with the number of chimes corresponding to the mode.
Continue to press and hold the LOCK button on the transmitter until the desired mode is reached.
Remote Activation Verification
Continue with the following steps in order to personalize the horn for the remote activation verification feature:
Press and hold the power door lock switch in the UNLOCK position for 10 seconds. The horn will chirp when the horn setting for the remote activation verification has changed between disable and enable.
Press and hold the power door lock switch in the UNLOCK position for 10 seconds again to change the horn setting back to the original setting. The horn will chirp when the horn setting for the remote activation verification has changed.
Exit Programming
Any of the following list of events will cause the programming sequence to be terminated:
The ignition is moved from the RUN position.
The vehicle is shifted out of REVERSE for vehicles with a manual trans.
The park brake is released for vehicles with a manual trans.
Chime Level Adjustment
In order to adjust the chime level, perform the following steps:
Turn the ignition ON.
Turn the radio OFF.
Press and hold the radio push-button 6 until either LOUD or NORMAL appears on the radio display. The chime sounds 3 times for each volume change.
To toggle the setting, press and hold the radio push-button 6 again.
As far as the CD player goes you need to send out your radio or have the dealer get you another. Then you can have them send your CD to you after the repair person gets it out. Yes your radio/cd player needs to be repaired.
Hope this helps you
Mark
