Chevrolet Repair: spark plug wire set, spark plug wires, chevy cavalier

Question
I am trying to change the spark plug wires on my 95 chevy cavalier 2.2L and cannot figure out how to get back behind the engine to the ignition coil where the other end of the wire is located.  It seems like you need to be a magician to get to it.  Am I missing something that makes this easy? Second question is about the A/C compressor.  I noticed a loud squealing noise coming from under the hood and was able to see that it was coming from the plate on the compressor which is turning slowly.  I sprayed a bunch of lubricant on the plate and the noise stopped.  I am wondering if the plate should be rotating slowly while the drive belt goes fast and whether this is something I need to be worried about.  I know the system needs to be recharged as the cold air isn't as cold as it should be.  

Answer
Hi Roberto, You need to get under the car to get at the wires,or reach around the back of the engine. Who said car repairs are easy!! Your A/C compressor hub is bad and that is why it's making noise and turning. It shouldn't be touching at ALL. You will need to have a shop take care of this for you.

Have a Nice Day        Mark