Chevrolet Repair: 95 Chevy 4x4 4.3 Vortec, chevy 4x4, passengers seat

Question
Van, i currently bought a 95 Blazer LT. the tranny was replaced and since the 4x4 will not ingage. the light blinks but nothing happens. i talked to a tech who told me to blow out and check the module in the transfer case but i can not seem to locate the swith. i was wolndering if you knew where to get a diagram or something to help me out.
Thank you.

Answer
Hi Devin,
Never heard of blowing out a module...
Sounds possible that the actuator on the front axle may not be engaging, but the switch on the transfer case, or associated wiring could affect that.
The switch is on top, like right under the passengers seat area.

There is a site that sells aftermarket actuators for the front axle, and I believe they have some troubleshooting tips.
Here are the links.

www.pirate4x4.com/tech/billavista/PR-shaft/index.html
www.4x4posi-lok.com/
And you might want to check out this forum link for this and hundreds of other topics.

www.chevytalk.org/

Good luck,
Van