Chrysler Repair: 2007 Chrylser Town and Country wont run in drive, crank shaft, water intrusion

Question
I own 2007 Town and country van. When ever it would rain and my van got wet the check egine light would come on then shut down until it got dry underneath the vehicle. So I changed the crank shaft sensor and now my van will start put won't run once I put it in gear is it the ASD? Please help sign  Desperate to save money....

Answer
I believe your root problem may be water getting into the PCM wiring. The PCM on your vehicle is located in the left front wheel well foward of the tire. It is covered by a splash shield which will need to be removed in order to inspect the wiring. Check the connectors for water intrusion as well as the wiring harness as it leads up to the battery area for any broken and/or chafed wire that could be exposed to water.