Chrysler Repair: 04 Sebring Sedan: Lower Control Arm Bushing, private option, max ed

Question
Hello Roland - I had to start a new question as I max'ed out the follow-ups on the other.  Just to re-iterate:

Upon checking out the front driver side, what appears to be the bushing on the lower control arm is showing some serious wear. I need to confirm that this is the part, but assuming it is, I think this is something I can definitely take on. Unless I am wrong, it appears to be only a few bolts.

Answer
Hi Jason,
There are two bushings in-board on the lower control arm, a front and a rear. But to change the bushings you need to remove the control arm which is a 13-step process. Then you need one special tool to press out and press in the bushing and that is a 4-step process. Perhaps you mean a different bushing? Also is the bushing actually failing or just an appearance?
Perhaps you mean the stabilizer bar bushing (of which there are one at either end). That would be a straight forward replacement about which I can send you the pages from the '04 manual as an attachement to an email. But to do that I need to know which bushing we are dealing with and what is your email address as I am not given it by the Allexpert site.
Continue to us a private option if you send me that. I have changed this exchange to public as there is general interest possibly in thise question and nothing personal about it.
Roland