Question2001 Chrysler T&C LX (3.3l), The tranny is in limp mode (2nd
gear only), not getting any codes and check engine is not
on. The speedometer stays at zero (does not move), the
shift indicators (PNRDL)all have the lighted biox around
them where u cannt visibly tell where your shift is. Here's
what I've done: Replaced the Selnoid pack, replaced output
and input speed sensors. Oh and I also had a new PCM put in
the car. I even read on one of your posts to try to read a
code from pushing the mileage reset button for 5 seconds, it
gave me nothing and when it was testing, everything tested
ok at the different intervals. WHat might my problem be?
Answeru have not read on any of my posts about pushing the mileage reset button for 5 seconds.
I do not use that sorta code settings only scanners and or pcodes from newer cars built in software.
U will more then likely need a tranny shop take a look at it for the real codes in teh trans computer.
