Chrysler Repair: programming car remotes: 95 LHS, chrysler lhs, key fobs

Question
Hi Roland
I bought a couple remotes for my 1995 chrysler LHS i tryed progamming them and now i don't have my power locks working and the remotes still don't work. Can you please tell me what i can do do i disconect the batery and let everything reset,and if thats the case do you have a code for me to try it would be greatly appreciated thank-you very much in advance.......

Answer
Hi Kevin,
When you say "I don't have my power locks working" you mean that the only way the door locks will function is either by means of the mechanical push buttons or the door key?
Do you notice anything else not working? The power for the door lock relays comes from the ignition off draw fuse which also runs the interior lights so if those are off then I would suspect fuse #13 is blown.
How did you try programming the new key fobs?
You could try disconnecting the battery and then touch the two cable clamps together for about a minute and then reconnect and see if that solves the problem.
I have a '94 manual and it describes the fob programming as having to go to the center stack bottom and find the traction control connector and ground pin 4. Did you do that or something different in your '95?
Roland