Chrysler Repair: 1998 Cirrus LXI 6CLY, plastic screws, battery blanket


Question
CRIPES!! I CANT FIND THE @#$#?$!@?# BATTERY, I looked for it and it just dumbfounded me, Please help ! thanks Phil in desperate need before he has to be at work. :(

Answer
BATTERY
REMOVAL
Battery is accessible without removing the tire and wheel.

Make sure ignition switch is in OFF UNLOCKED position and all accessories are OFF
WARNING: NEVER GET UNDER A LIFTED VEHICLE IF NOT SUPPORTED PROPERLY ON SAFETY STANDS.

Disconnect battery negative cable from remote negative terminal on shock tower.
Turn steering wheel to the full left position.
Twist the four plastic screws one quarter turn to release shield.
Remove shield.
Disconnect battery blanket heater cord, if equipped Battery with Blanket Heater
Remove battery negative cable followed by the battery positive cable.
Remove bolt attaching the battery strap to the battery hold down bracket. Remove hold down bracket bolt.
Slide battery to rear of tray and lift over lip. Use care not to tip battery so that the acid will not spill out.
Remove battery.
Remove battery blanket heater if equipped Battery with Blanket Heater
INSTALLATION
For installation, reverse the above procedures. Tighten battery cables to 17 N·m (150 in. lbs.) torque.