Chrysler Repair: MAP light on 2000 stratus es, light buttons, dome lamp

Question
Hi Kevin,
The other night i got in my car and went to hit both map light buttons to see what i was doing and the right one came on no problem but i heard something snap or pop in the left one. the light didnt come on. Now when i try to push the button it feels as of there is no spring in there like it popped out of place.

How do u take down the MAP lights so i can try to hopefully fix it. I didnt want to just yank and cause more problems.

Also the light doesnt come on when i open my door anymore but if i mess around inside the housing of the light i can turn it on till i move my finger again.

Dont know if it matters but
2000 stratus ES


Thanks Alot

Answer
DOME LAMP BULB
REMOVAL
Remove lamp lens from lamp assembly by inserting a flat bladed pry tool in the slot provided in the bezel.
Separate lamp lens from lamp assembly.
Pull dome lamp bulb from socket.
INSTALLATION
Push dome lamp bulb into socket.
Install lamp lens by first inserting the two tabs located opposite the lamp switch and then pushing upward on lens to engage remainder of tabs.