Chrysler Repair: 2001 Chrysler PT Cruiser, chrysler pt cruiser, engine oil pan

Question
Hello-I need to know in detail how to remove and replace the Engine Oil Pan in my 2001 PT Cruiser. I am not a licensed or certified Technician, but I have LOTS of experience working as a Lube Tech/Service Advisor at a local Garage. I think I know enough to take on this project with some help. The more information I have the better! Thanks ; )

Answer
OIL PAN
REMOVAL
Raise vehicle on hoist.
Drain engine oil and remove oil filter.
Remove right inner splash shield.
Remove structural collar. Refer to procedure in this section.
Remove lower torque strut. Refer to procedure in this section.
Remove oil filter adapter and gasket Oil Pan
Remove oil pan and gasket Oil Pan
Clean oil pan and all gasket surfaces.
INSTALLATION
Apply Mopar® Engine RTV GEN II at the oil pump to engine block parting lines Oil Pan Sealing
Install oil pan gasket to the block.
Install pan gasket and pan. Tighten screws to 12 N·m (105 in. lbs.)
Install oil filter adapter and gasket Oil Pan Tighten screws to 12 N·m (105 in. lbs.)
Install oil drain plug and oil filter.
Install structural collar. Refer to procedure in this section.
Install lower torque strut. Refer to procedure in this section.
Lower vehicle and fill engine crankcase with proper oil to correct level.