Chrysler Repair: head bolts, cylinder head bolts, dodge neon

Question
i was wondering what are the head bolts supposed to be torqued too. the car is a 1995 dodge neon 2.0 liter

Answer
Before installing the bolts the threads should be oiled with engine oil. The 4 short bolts 110 mm (4.330 in.) are to be installed in positions 7, 8, 9, and 10 Cylinder Head Tightening Sequence
Tighten the cylinder head bolts in this sequence shown in Cylinder Head Tightening Sequence Follow the four step procedure listed below.
First Bolts 1 thru 6 to 34 N·m (25 ft. lbs.) and Bolts 7 thru 10 to 28 N·m (20 ft. lbs.)
Second Bolts 1 thru 6 to 68 N·m (50 ft. lbs.) and Bolts 7 thru 10 to 28 N·m (20 ft. lbs.)
Third Bolts 1 thru 6 to 68 N·m (50 ft. lbs.) and Bolts 7 thru 10 to 28 N·m (20 ft. lbs.)
Fourth Turn an additional 1/4 Turn, Do not use a torque wrench for this step.
Reverse removal procedure, for rest of installation.