Questioni have a chrysler 2004 300m v6 i need to have my cam and crank sensor replaced do you know where that is located on the car
AnswerI live in Atlanta if u need some stuff done.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor sits above the drive plate.
Disconnect electrical connector from crankshaft position sensor.
Remove sensor mounting screw. Remove sensor.
REMOVAL - 3.5L
The camshaft position sensor is installed in the timing belt housing cover above the left camshaft sprocket.
Disconnect the negative battery cable.
Loosen the upper intake plenum, refer to the Intake System section.
Disconnect electrical connector from sensor.
Remove camshaft position sensor screw.
Pull sensor up out of the timing belt housing cover.
