Chrysler Repair: 2000 Jeep Gr Cheorkee, glass area, power accessories


Question
QUESTION: How can I get the door inside panels off.
I think my window regulator went out and I can't get the windows to stay up until Monday.

ANSWER: stuff something inside the glass area paper or a wood block.
I live in Atlanta if u need some work done let me know.

---------- FOLLOW-UP ----------

QUESTION: I got the window to stay up. I need to know how to get the inside panel off.

Answer
FRONT DOOR TRIM PANEL
REMOVAL
Remove trim plug from mirror flag bezel.
Remove screws attaching trim panel to door Front Door Trim Panel
Using trim remover (C-4829 or equivalent), detach trim panel perimeter push-in fasteners from door inner panel.
Lift trim panel upward and separate from door.
If equipped, disconnect harness connectors for power accessories.
Disconnect latch rods from inside handle actuator.
Separate trim panel from vehicle.
INSTALLATION
Connect latch rods to inside handle actuator.
If equipped, connect harness connectors to power accessories.
Position trim panel on door inner panel.
Press trim panel push-in fasteners inward around perimeter of door.
Install screws attaching trim panel to door.
Install trim plug in mirror flag bezel.