Chrysler Repair: Sebring Lxi99 not starting... weak spark, snail mail, cam sensor

Question
Hi Roland.

 My car Sebring 99 Lxi V6 2.5L is still without "spark", Can you help me please, and send me the diagram (jpg or pdf)of pins for the (2) 40 way connector of the PCM(SBEC III)? I want to know what are they for, I was checking pin by pin against ground of the upper connector harness (1 to 40), and I found that the ones from 11, to 20 are "connected to ground", so I would like to know, where are these wires going, what circuits are they feeding. But I have not found anything in the web for this diagram.
Thanks in advance. My email is a_estacado@hotmail.com

P.S. or If you know a site, let me know the e-address.

Answer
Hi Alex,
I have the powertain manual for the 2.5L for 1998 and if it is the same as for '99 here are the assignments for pins 11-20:
11=not used
12=not used
13=injector #1 driver
14=injector #6 driver
15=injector #5 driver
16=injector #4 driver
17=injector#2 driver
18=not used
19=not used
20=fused ignition switch 12V output
7=injector #3 driver

The other side of the injectors are all attached to the ASD 12V output but that would not be present, and the PCM would presumably be switching these wires from 12V to ground in synch with the cam sensor were the engine running. I can only xerox and snail mail to you because I don't have a scanner. Both plugs are black so I assume that the pins are numbered.
Roland