QuestionQUESTION: Transmission is solid, but will not up-shift to drive.Have changed fluid, filter, and new modulator, has good vacuum. Will smoke tires in reverse and low, but doesn't up-shift to drive. Thank-you for your time. Wyatt
ANSWER: Wyatt,
I been reading on this Q for 2 days now.
Most of the time its from 1st where low band adjustment comes into play.
The low band adjustment is on the left (driver's) side of the transmission, and sticks out of the case about 2 inches forward of the domed cover, about half way from the bottom to the top of the main transmission case.
Loosen the lock nut, if present, while holding the center bolt head with another wrench, then, with the lock nut way out of the way, tighten the adjuster with a torque wrench to 6 foot pounds torque, then back it off exactly 3 turns.
Re-tighten the lock nut now, without moving the adjuster.
Does it just not go or does it go from 1st to high rev? without catching?
Let me know
Mike
---------- FOLLOW-UP ----------
QUESTION: Hello Mike,
I did the adjustment on the trans before I contacted you. The trans does not over rev. The trans will not up shift at all out of 1st. Thanks again, Wyatt
AnswerWyatt, sorry to say but somthins up I wish I had an answer for ya but I dont.
IM getting ready to delete this ask a question thing i signed up for, I just dont have the time and Im finding a lack of patience as well with some Q's...not yours
Good luck Bud
Mike
