Dodge Repair: front turn signal removal 99 dodge dakota, marker lamps, inner fender

Question
How do you remove the headlight/turn signal assembly to get to the turn signal bulbs. I have one blown and can't figure out how to remove it.

Answer
HEADLAMP
REMOVAL
1.Open hood.
2.Remove the bolts attaching headlamp to the inner fender panel Headlamp
3.Grasp the headlamp and firmly pull the headlamp to disengage it from the panel.
4.Disengage the connector from the headlamp bulb.
5.Separate bulb from headlamp.
6.Remove the bulb sockets from the front park/turn signal/side marker lamps
7.Separate headlamp module from vehicle
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1.Install bulb sockets for the front park/turn signal/side marker lamps
2.Engage the connector to the headlamp bulb.
3.Position headlamp in inner fender panel and firmly push headlamp inward to lock into place.
4.Install the bolts attaching headlamp to the panel.