QuestionI have a cracked front bumper cover (the one with foglights) on my 2006 Grand Caravan SXT. I've purchased and painted the replacement, so now it's just a matter of swapping the old out for the new. Most of the fasteners are easily accessible, except for the ones that run along the top of the cover just forward of the front wheels. This line is below and behind the headlights, so their removal does not grant me access. From what I've seen, they look to be blocked from below as well unless there's more dis-assembly than I originally anticipated. What else do I have to take out? Thank you in advance.
AnswerREMOVAL
1. Release hood latch and open hood.
2. Remove the headlamp assemblies (Refer to 08 - Electrical/Lamps/Lighting - Exterior/HEADLAMP - Removal) .
3. Hoist vehicle and support with safety stands.
4. Remove the five push pin fasteners attaching bottom of fascia/air dam to radiator closure panel.
5. Remove front wheels.
6. Remove front wheelhouse splash shields fasteners as necessary to gain access to bolts attaching front fascia to fender. (Refer to 23 - Body/Exterior/SHIELD, Splash - Removal) .
7. Remove the two bolts and two nuts attaching fascia to the front fenders Fig. 1 and Fig. 2 .
8. Disconnect fog lamp wire connectors, if necessary.
9. Lower vehicle.
10. Remove two bolts attaching the upper grille support to the headlamp mounting panel at each side of the grille.
11. Remove bumper fascia from vehicle.
