Dodge Repair: 2006 Dodge Durango Headlamp, 2006 dodge durango, headlamp bulb

Question
Simply how do you replace a the entire passenger side headlamp assembly on a 2006 Dodge Durango LTD?

Answer
LAMP

 
1. Disconnect and isolate the battery negative cable.
2. Remove the access panel (2) from the access opening in the front of the front fender liner (1). To remove the panel: a. Pull the lower edge of the panel rearward until it disengages from the lower edge of the hole.
b. Slide the panel upward to its travel limit using the recessed pull cup (3) for leverage.
c. Slide the panel downward far enough to disengage it from the upper edge of the hole.



 
3. Reach through the fender liner access opening to remove the nut (7) that secures the stud (6) on the back of the front lamp unit (5) to the upper reinforcement of the fender (1).
4. From the front of the vehicle, remove the two screws (4) that secure the lower edge of the lamp to the lower reinforcement of the fender.
5. Grasp the lamp firmly and pull straight forward to disengage the ball stud (3) on the back of the lamp from the plastic grommet (2) in the upper fender reinforcement.



 
6. Pull the lamp away from the fender far enough to access and disconnect two wire harness connections (1) from the back of the lamp: a. headlamp bulb (2)
b. front park/turn signal/side marker bulb socket (3)

7. Remove the front lamp unit from the fender.