Dodge Repair: 07 Dodge nitro window glass, dodge nitro, two graphics

Question
hey kevin
was wondering how you put in the window glass on LR having no luck need help asap

Answer
REMOVAL

 
1. Remove the trim panel (Refer to 23 - Body/Doors - Rear/PANEL, Rear Door Trim - Removal) .



 
2. Rotate the inner belt molding outboard while pulling up to disengage the retention tabs.



 


NOTE:  Place the glass in the full down position in order to access the window regulator.  
3. Access the window regulator through the hole in the carrier plate. Disconnect the window regulator (2) from the door glass (1).



 

NOTE:  The following two graphics are shown with the carrier removed for clarity.  
4. Rotate the glass upward inside the run channel.



 
5. Remove the door glass from the window opening in the door.