Dodge Repair: Dodge 2007 Caravan SE Access Interior, 2007 dodge caravan, dodge caravan

Question
Kevin,

I got an email saying this question was answered, but
cannot locate the answer. Can you help me find it

"

I am trying to get to the BCM connectors on my 2007 Dodge Caravan. I removed the plastic drivers side panel, but I cannot see the connectors. What else do I need to access the connectors.

Falling short of that, what is the correct way to drop and reinstall the knee airbag underneath the steering column"

Answer

pic REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the lower instrument panel silencer.
3. Remove the knee blocker and reinforcement (Refer to 23 - Body/Instrument Panel/KNEEBLOCKER - Removal) .
4. Disconnect the five wire connectors from the bottom of the Body Control Module (BCM).
5. Move bulkhead wiring aside.
6. Remove the screws holding the BCM to the bulkhead.
7. Remove the BCM from the mounting bracket.


REMOVAL
1. Remove lower steering column cover (Refer to 23 - Body/Instrument Panel/COVER, Steering Column Opening - Removal) .  
2. Remove the park brake release handle link from the park brake release handle.
3. Disengage inflatable knee blocker wire connector from lower instrument and disconnect the wire connector .
4. Remove screws attaching to instrument panel.
5. Remove inflatable knee blocker from vehicle.