Dodge Repair: HELP, crankshaft position sensor, crankshaft sensor

Question
WHERE IS THE CRANKSHAFT POS. SENSOR LOCATED ON A 1998 DODGE INTREPID 3.2 L.

Answer
CRANKSHAFT POSITION SENSOR
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing Crankshaft Position Sensor The bottom of the sensor sits above the drive plate

REMOVAL
Disconnect electrical connector from crankshaft position sensor.
Remove sensor mounting screw. Remove sensor.
INSTALLATION
Install sensor
Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque.