Dodge Repair: 98 dodge dakota sport, dodge dakota sport, ft lbs torque

Question
QUESTION: Can you please tell me where the crank shaft position sensor is located on a 98 dodge dakota sport?

ANSWER: what engine size do u have?

---------- FOLLOW-UP ----------

QUESTION: the engine size is 2.5l. Sorry I am no where near the Atlanta area but thanks for the offer.

Answer
REMOVAL
Remove air tube between throttle body and air cleaner housing.
Near rear of intake manifold, disconnect pigtail harness (on the sensor) from main electrical harness.
Remove 2 sensor mounting bolts.
Remove sensor.
Remove clip from sensor wire harness.
INSTALLATION
Install sensor flush against opening in transmission housing.
Install and tighten two sensor mounting bolts to 19 N·m (14 ft. lbs.) torque
CAUTION: Two bolts are used to secure the sensor to transmission. These bolts are specially machined to correctly space the unit to flywheel. Do not attempt to install any other bolts.

Connect electrical connector to sensor.
Install clip on sensor wire harness.
Install air tube between throttle body and air cleaner housing.