QuestionQUESTION: tfi 4 ignition module the color of my wires don't match the Chilton book or this Mitchell diagram? So I have 6 wires that I don't know what to do with?
ANSWER: what are you wanting to do with them i don't see a question here?
---------- FOLLOW-UP ----------
QUESTION: find where they plug into the module? or find the right wiring diagram? I have a Black,white Light blue and ,Yellow green wires that run in a silver harness together. I don't know what pin they go in the module? I have a wire from the negative coil side that I think goes into the second pin in the tfi module?. I have a blue red wire that should be the crank signal that should be# 3 terminal? and a white wire that i'm not sure of?
Answerthe wires i am showing i just don't know which side to start from but they are in this order either from left to right or vise versa
black,dark green with yellow dots,white with light blue hash,red and light blue,yellow with dots,and dark blue.
if your red and light blue is pin three then the dark blue wire should be 1,yellow 2,red 3,white 4,dark green 5 and black 6, connector should be numbered, good luck.
