Ford Repair: FORD BRONCO WONT START, ford bronco 2, ford bronco

Question
I have a 1987 ford bronco 2 4x4 I took the water hose and was washing out the radiator and it just cut off and now won't start back.I changed the module and the coil pack and it still won't start and when you switch it on the check oil light comes on and won't go off could this have anything to do with it any help would be great.

Answer
Most likely due to the age of your bronco, the wiring is sensitive to water.  I'd remove the distributor cap and spray a little WD-40 on and in it to displace any moisture.  If that doesn't work, leave the hood open in the sun to dry everything else out.  Good luck,
Jason