Ford Repair: 1969 Mustang 390 carb and manifold, jean boyer, 1969 camaro

Question
Hi Ken,
I have a 1969 Mustang MACH I 390 and have decided to work under the hood now.  When cleaning the carb, noticed numbers that were not correct for the car.  After researching the numbers, discovered the card is a Holley 4053, which was made 1 year for a 1969 Camaro Z28 (at least the correct year is on the car).  I did find a new carb Autolite 4300 which is being retored now.  My question is regarding the intake manifold.  I can not find any listings with the correct numbers for it.  The carb was easy !  Would you know what the correct part numbers would be for that manifold.  I am detailing the engine compartment right now and can make out most of the numbers on it, but not sure where to look for what is really needed to id it.  Any other info you could supply concerning this topic would be greatly appreciated.   If there is a website that would also help me out with my restoration that you know of, I would also appreciate that as well.
Thank you in advance for your assistance !
Sincerly,
Jean Boyer

Answer
Jean Boyer,

If you send me a personal email with all the information from the data tag, which is located on the driver's side door, complete with your personal email address, I will send you all the information on your car. On eof my files is down, so I can not get you the manifold information at this moment. Sorry for the inconvienience and I look forward to hearing from you.


Ken
pnycoral@localnet.com