Honda Repair: clutch, clutch fluid, bleeder valve

Question
The clutch fluid leaked out of my honda accord '94  2.2 ltr. I refilled the resovoir and pummped the pedal but it still dosent work.How do I bleed the system?

Thanks in advance for any info you have.

Ken

Answer
Ken:
When you raise the car, locate the release cylinder on the front of the transaxle housing. Remove the dust cap and place a plastic hose over the bleeder valve and place other end in container with brake fluid. Have someone press the clutch and hold. Open the valve and keep open until bubbles ceases. Close valve and continue doing this until all air is removed from system. Watch the reservoir to make sure you always have fluid.
Good luck.
Bill