QuestionRe more info on the McCullough Pro Scraper 28S; the model #B400128-54 is the one I have. And, yes, it has a straight shaft. Thanks for speedy reply.
Rich
-------------------------------------------
The text above is a follow-up to ...query for using brush cutter saw blade on string trimmer.
-----Question-----
Will a brush blade adapt to this model trimmer? If so, have you got one?
Thanks
-----Answer-----
Hello Rich:
Send me the Complete Model Numbers, Please. With these I can Locate a Breakdown/IPL and Service Manual and Better Assist you. However, If the Trimmer has a Curved Shaft, then No a Brush Cutter will Not Adapt. If the Straight Shaft, then Most Times a Brush Blade will Adapt. The Complete Model Numbers will Assist in the Answer. Thanks.
Respectfully
John
Answer Hello Rich:
You gave me Just Enough to Locate the Breakdown/IPL. The Information you need to Keep Handy is as Follows. The Model is 12-400128-54 Pro Scraper 28S. It will Make it Easier to Locate the Breakdown/IPL when Looking for Parts and Accessories. The Blade Assemble is Shown as Pieces. Go to this Addy http://www.milacalawn.com/home2.asp and Select You can Click Here to Start Looking up Parts. Then Select the Box Marked SHOP ONLINE Parts Look Up. Then Select the Model Tab. Select the OEM. Enter the Model Numbers 12-400128-54 and Click Search. Double Click on your Model and then Select Shaft/Shield/Cutter Assembly. Use the Explode Feature at the Top and Locate the Following Numbered Parts. These will be Required to Properly Mount the Brush Blade. Diagragm Numbers are 46, 47, 49, 50, 51, 52, 53, Use Blade #54 Not #55 because of the Cut Pattern, 67, 68, 69. Take the Diagragm Numbers and Locate the Part Numbers. Your Local Small Engine Shop Should Have or can Order the Parts you Require. Hope this Helps. I am here if you Require more Assistance. Thanks.
Good Luck
Respectfully
John
