Isuzu Repair: starter replacement, battery cables, heat sheild

Question
Help on replacing the starter on a 2000 rodeo 4wheel drive?

Answer
Ohh George. It had to be a 4wd didn't it. No im just kidding. Well i would recommend removing the negative battery cables. Remove the driver-side wheel. The heat sheild that covers the starter. The flywheel cover. You(MAY HAVE TO REMOVE THE EXHAUST SYSTEM AS WELL.) Then disconnect both wires from the starter and you should be able to wiggle it out underneath the car as I have done before or out above the wheelwell(sometimes works). Let me know how it goes though ok?