Jeep Repair: Jeep Cherokee 1997, jeep cherokee 1997, negative battery cable

Question
How do I remove the ignition cylinder housing from my 1997 jeep Cherokee?

Answer
The ignition key must be in the key cylinder for cylinder removal. The key cylinder must be removed first before removing ignition switch.

KEY CYLINDER REMOVAL
1.Disconnect negative battery cable at battery.
2.If equipped with an automatic transmission, place shifter in PARK position.
3.Rotate key to ON position.
4.A release tang is located on bottom of key cylinder Key Cylinder Release Tang
5.Position a small screwdriver or pin punch into tang access hole on bottom of steering column lower cover Key Cylinder and Cover Removal
6.Push the pin punch up while pulling key cylinder from steering column.